Open today by appointment
Yes, laying old oak planks over an existing floor is possible, and in many cases a logical choice. The existing floor serves as the substrate, which limits demolition work and installation time. However, there are a number of technical requirements the situation must meet, from available floor height to moisture control. The questions below provide a concrete answer for each topic.
Allow for a minimum of 18 to 22 millimeters for the planks themselves, plus the thickness of any subfloor or leveling layer. In practice, this means accounting for a total buildup of 20 to 40 millimeters, depending on the condition of the existing floor and the chosen installation method.
Antique oak is typically sawn into thicknesses of 20, 22, or 25 millimeters for floorboards. Thinner than 18 millimeters is not recommended for reclaimed oak, as the material would have too little mass to remain stable, especially with a floating installation.
Before you begin, check whether doors, threshold profiles, and adjoining spaces can accommodate the extra height. This is a detail that is often overlooked in practice but is difficult to correct after the fact.
Old oak planks can be laid on a concrete floor, an existing wooden floor, anhydrite, or a screed, provided the substrate is flat, dry, and stable. A flatness tolerance of no more than 3 millimeters per 1.8 meters is a common standard for direct fixing or gluing.
The most common suitable substrates are:
An uneven or springy substrate is the most common cause of problems after installation. Do not take any risks with this.
Antique oak is dimensionally more stable than freshly sawn timber, but it still responds to differences in moisture levels. When laying on an existing floor, the greatest risk factor is moisture rising from the substrate, particularly from concrete or anhydrite without an adequate vapor barrier.
The timber we stock has typically been naturally dried for more than five years. This results in a lower moisture content and greater stability than freshly cut or briefly dried wood. Even so, the same rule applies to this material: always allow the planks to acclimatize in the room where they will be installed, for at least a week, preferably longer.
Measure the moisture content of the substrate before installation. A concrete floor generally must not contain more than 2 percent moisture when gluing; for anhydrite, the threshold is lower. If in doubt, always use a vapor barrier or vapor-retarding primer as an intermediate layer.
The most suitable method depends on the substrate, the thickness of the planks, and the requirements placed on the floor. There is no universal preference, but for most situations involving reclaimed oak on an existing floor, gluing or screwing is preferable to floating.
A brief comparison of the three methods:
Planks wider than 120 millimeters are not typically installed as a floating floor. The mass and natural movement of wide oak require a fixed method of attachment.
For an overlay floor, planks 18 to 25 millimeters thick and 80 to 200 millimeters wide generally work well in most situations. Wider planks are possible, but place greater demands on the stability of the substrate and the fixing method. The right choice depends on the space, the desired appearance, and the available floor height.
Antique oak is not uniform by nature. The planks vary in width and length, which is precisely what contributes to the character of the floor. With an overlay floor of old planks, it is wise to align the dimensions with what is actually available in stock, rather than working from a strict technical specification.
Shorter lengths are easier to work with in smaller spaces or with complex floor layouts. Longer planks create a calmer visual effect, but require more attention during acclimatization and installation.
The costs consist of two parts: materials and installation. Antique oak floorboards are generally priced higher than new wooden floors in terms of material cost, but this reflects the drying time, stability, and character of the timber. Exact prices depend on dimensions, quality, and available stock.
Factors that influence the total price:
For an accurate estimate, it is worthwhile to present your situation and request a quote based on the actual dimensions and desired material. Also take a look at completed projects for an idea of what is possible in practice.
Laying oak planks over an existing floor requires the right choice of materials and thorough preparation. We are happy to help you think it through, from the first question to custom delivery.
Would you like to know what is currently in stock, or do you have a specific project in mind? Visit the timber yard in Doorwerth for a personal consultation, or request a quote and we will come back to you with a concrete proposal.